Headstock Bearings: Honda VT500 VT 500 (1983-1985) Honda MB50 The coil is 55mm centre

The coil is 55mm centre to centre mounting with 1 spade connector

This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a Honda ATC200 for the years and models shown above

This ignition coil pack will replace 5M0-82310-M0 on a CV80 Beluga for the years shown above

This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on an R Nine T for the years and models shown above

Headstock Bearings: Honda VT500 VT 500 (1983-1985) Honda MB50 The coil is 55mm centreBrand new set of headstock steering bearings to fit: Honda VT 500 C Shadow (1983 1984). Honda VT 500 E Eurosport (1983 1985). This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a Honda VT500 for the years and models shown above. Top sized: 26mm x 48. 5mm x 15mm. Bottom sized: 30mm x 50mm x 15mm. All sizes set out ID x OD x Thickness. If you require different sizes