12V, 2.8A Step-Down Voltage Regulator D30V30F12 Category_Mechanics and Materials/Robot Frames will do the DHCP setup

will do the DHCP setup for you

and 4 pins that can do analog inputs/PWM output

Single USB-UART bridge chip provides transfer rates up to 3 Mbps

The XBee S2C module has a uniform pin map with other XBee modules

12V, 2.8A Step-Down Voltage Regulator D30V30F12 Category_Mechanics and Materials/Robot Frames will do the DHCP setupThis small synchronous switching step down (or buck) regulator takes an input voltage of up to 45 V and efficiently reduces it to 12 V. The board measures only 0. 7 0. 8 yet delivers typical maximum continuous output currents between 1. 5 A and 3. 5 A , depending on the input voltage. An optional enable input can put the regulator in a low power state with a current draw of 10 A to 20 A per volt on VIN. The regulator also features reverse voltage