Headstock Bearings and Seals: Honda FT500 FT 500 (1982-1983) Honda NS250 It has 335mm pin/pin mounting

It has 335mm pin/pin mounting points and a 70mm length shroud

This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a Yamaha YZF-R7 for the years and models shown above

This ignition coil set has been manufactured to upgrade original / standard coils or replace Dynatek coil packs on a Kawasaki Z550 for the years and models shown above

Honda CBF 1000 F (2010-2011)

Headstock Bearings and Seals: Honda FT500 FT 500 (1982-1983) Honda NS250 It has 335mm pin/pin mountingBrand new set of headstock steering bearings with seals to fit: Honda FT 500 (1982 1983). This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a Honda FT500 for the years and models shown above. Top and bottom steering bearings with seals are included. Top sized: 26mm x 48. 5mm x 15mm. Bottom sized: 30mm x 50mm x 15mm. All sizes set out ID x OD x Thickness. Seals aren't